fbpx

Evolution Liners

SST and EVO logo combo graphic

BRILLIANT THINKING

STARTS HERE

LINER

Learn about the newest
EVOLUTIONEVOLUTION LINER

SST and EVO logo combo graphic

high-performancehigh-performance

Pre-loaded in a single-use shell

CWG SST-Driver
SST and EVO logo combo graphic

brilliant design forhigh-performancehigh-performance

CWG SST-Driver
SST and EVO logo combo graphic
Set Up Info
  • 21mm mouthpiece opening
  • 10mm lead-in at the end of the claw tube
  • 11mm ID at the bumper section tapering to 13.7mm ID at the top of the milk tube for high flow rates

12.0″ – 12.5″ hg

  • Check with no milk flow at system vacuum with teat dummies.
  • Check at the short air tube of both pulsation channels

A-phase

110ms +/- 30ms

B-phase

475 – 500ms

C-phase

110ms +/- 30ms

D-phase

>200ms

  • A and C phases are a function of pulsator style/brand, length of pulsation hose, and liner/shell design and cannot be changed by rate and ratio.
  • * As with any liner change, it’s critical to observe cow comfort levels and check for discoloration of the teats. Transition to a new liner may be immediate but could take several days. Vacuum and pulsation changes should only be made after cows transition completely.
SST and EVO logo combo graphic

TIME FOR YOU TO

SAVE LABOR, TIME AND MONEY

That’s the whole point of these brilliant, pre-loaded silicone liners. Talk with us about putting the genius SST-Driver to work for you.

evolution-liners.com
800-828-9258